Dust Control Companies and Their Quest to Combat Dust Pollution Problems
View PDF | Print View
by: LydiaGreyson | Total views: 25 | Word Count: 369
Wind fencing may also be used to cut down on wind and thus reduce the quantity of airborne dust. Wind fences are designed to act as regular fencing as well as to block gusts of wind. Polymers may be used to stabilize soil and prevent dust pollution. They work by bonding soil particles together on the surface to create a kind of protective coating over the dirt. Essentially, these work like a kind of glue.
Methods that a dust control company may use to stabilize the soil and reduce dust pollution vary case by case. Magnesium chloride and calcium chloride are just two of these methods. Both of these chemicals attract water from the air and retain it within the soil. They are widely used for the purpose of dust control and to prevent soil erosion.
Choosing dust control company is important. Most dust control companies use one or more of the above methods. They will also be able to best advice which dust control solutions will work in a particular locale, taking into account such factors as the type of soil, the amount of wind and the topology of the land. They will also be able to provide a quote based on how much of a square footage or mileage they are expected to treat.
The type of dust control solution applied to a particular surface depends on how much money is to be spent, the type and quantity of traffic expected on the surface and to what extent the person paying for the service wants it to be "green". Dust control companies should be experienced in applying the dust control method and will be able to use it so as to maximize its effectiveness in a particular situation.
They will also be able to work within the restrictions of local governments. Among the restrictions placed on the use of dust control methods are: Ensuring that the dust control product (if using a chloride product or polymer) does not affect any of the surrounded area, like plant life or pavement. They may also need a permit from the authorities. The product should not be applied to paved road surfaces. The product should not affect groundwater or any water bodies in the vicinity.
About the Author
Rating: Not yet rated
Login to vote
